Specification:
OUTPUT
| Variable voltage range | 0 to 30 V (+10%) |
| Variable voltage control | Single turn coarse and fine control, continuously adjustable |
| Variable current range | 0 to 30 A (+10%) |
| Variable current control | Single turn coarse and fine control, continuously adjustable |
| Configuration | Constant Voltage and Constant Current |
| Load regulation | ≤ +/- 0.1% + 2 mV for V 10% change in line voltage |
| Line regulation | ≤ +/- 0.1% + 2 mV for load change on zero to full load |
| Ripple and Noise | 1 mV RMS Max. 20 Hz to 20 MHz |
| Stability under constant line, load and temperature – in Constant Voltage mode |
< +/-0.2% +/-10 mV |
| Stability under constant line, load and temperature – in Current mode |
< +/-0.2% +/- 0.5 mA |
| Transient response | 0.1 set to within 10 mV of set output voltage for load change from 50% to 90% |
| Total output power | Nominal: 900 Watts, Maximum: 2000 Watts |
| Meters | Display to indicate Volts and Amps. |
| Voltage and current accuracy | ≤ +/- 0.5% ref. voltage 1 volt |
| Terminals | Provided on the front / rear panel |
INPUT:
| Voltage / Frequency | 220 V +/- 10%, 50 Hz, Single Phase AC |
| Total input VA | 1300 VA or better @ 65% effieiency |
| Input current rating | Nominal: 5.05 Amps @ 220m Volts, Maximum: 0.28 Amps @ 207 Volts |
| Connection | 3 Pin, 15 Amps Moulded cord |
PROTECTION:
| Overload & Short circuit (Through CC/CV Mode) |
DC Fuse + MCB as well as AC MCB or over voltage protection / over current protection |
ENVIRONMENTAL:
| Operating Temperature | 0 to 55 deg C |
| Humidity | 90% at 45 deg C non condensing |
| Cooling type | Force Air, Natural convection cooling |
ACCESSORIES:
| All measuring probes with connectors | Yes provided |
| All charging probes with connectors | Yes provided |
GROUP : CERTIFICATION:
| Availability of type test report from Central Govt., lab/NABL/ILAC accredited lab to conformity of the specification |
Yes |
Reviews
There are no reviews yet.